CGW34635, 7X1/2X1-1/4 TY1 RA60J/K GRINDING WHEEL
Item #: CGW34635
Product Info
Manufacturer:
CGW-CAMEL GRINDING WHEELS
7X1/2X1-1/4 TY1 RA60J/K GRINDING WHEEL
Item Specifications
-
Aluminum Oxide
-
60
-
7
-
1/2"
-
1-1/4"
-
3,760
-
TY1
-
RA – Ruby Aluminum Oxide • Ideal for rough grinding of all tool steels including steel with high levels of chromium. • A tough, sharp, yet friable abrasive with high material removal rate and strong form holding capabilities. • Grain is tougher than White, AZ or Pink grain wheels. Surface Grinding Tips There are many applications in surface grinding, from heavy stock removal to a very precise finish and size requirements. Matching the right wheel with the application is very important to achieve the needs of the grinder. There are many ways to meet these needs. If a fine finish is required a finer wheel may be used. Many times an operator may use one wheel to do the job of many changing the speed and feed of the wheel. Grit Size / Grain Size Combinations Grit Size: All abrasives are sized to a national standard and are assigned a numerical designation. The higher the number, the finer the grit size. When selecting grit size, the following should be considered: Use Coarse Grit: • For rapid stock removal Use Fine Grit: • For form holding • For large areas of contact • For small areas of contact • When finish is not important • For fine finishes • For softer materials • For hard, brittle materials
-
1.47 lbs per EA