Mold Release Sprays from Slide Products

Item #: SL40810P
Econo-Spray® 3 contains a robust non-silicone release with a food-grade active ingredient. This product is highly paintable and will permit ultrasonic welding of molded parts. It affords excellent release of all thermoplastics.

Item #: SL40012N
Paintable Mold Release is a light-duty, dry formulation that is UL recognized and requires no special cleaning prior to molding. Molded parts can be painted or decorated post-molding and the release will not interfere with part bonding, heat sealing, laminating or ultrasonic welding. You get perfect finishes every time and more cycles per can over other comparable releases.

Item #: SL41612N
EconoMIST Mold Release Spray is an economical, light-duty, solvent-free, silicone-based mold release. It is a UL-recognized and NSF-certified formulation that’s safe for food applications. EconoMIST is Slide’s most popular mold release spray.

Item #: SL46612N
Knock Out is the mold release that works where others have failed. It will knock out your production problems and get "sticky parts" cleanly out of the mold. It is approved for indirect food contact and is also paintable. Knock Out Mold Release delivers a light, dry coating that is amazingly effective, working for several cycles without re-application.

Item #: SL54912
Heavy-Duty 10% Mold Release provides Slide's highest percentage of active ingredients for a release agent. This formulation is also widely used in conjunction with Slide’s Super Grease Ejector Pin Grease on ejector pins. It’s an ideal lubricant for the front half of ejector pins (pins in forward position). This product acts as a nearly dry lubricant minimizing the possibility of leaching out onto molded parts. Heavy-Duty 10% Mold Release is a food-approved formulation that is paintable and non-silicone.

Item #: SL40510
Econo-Spray® 1 is one of our food approved mold release formulations that contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. It is safe to use on most resins and cleans off easily with a mold cleaner.

Item #: SL41012N
A dry, light, water-repellent powder, our Zinc Stearate Mold Release is economical to use and provides a better finish. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs.

Item #: SL45812H
Urethane Mold Release is an extremely effective, non-paintable formulation for all polyurethanes: rigid, semi-rigid and flexible urethane foams. Urethane mold release imparts a light, dry coating on the mold, eliminating build-up. Yet, it is so effective that it continues to work for several cycles between applications.

Item #: SL40112N
Get more cycles per spray, more cycles per can, with Slide's Silicone high-quality, pure silicone-oil mold release. Keeps the most challenging parts from sticking while speeding up production. It is recommended for food-packaging molding, and is extremely effective for injection and compression molding.

Item #: SL41112N
DFL Dry Film Lube Mold Release is an excellent, fast-drying release agent for injection molding where clarity and deep draw are important, especially with hard, brittle resins. It will not create "hydraulic effect" on deep drafted molds. Its "dry" formulation won’t pick up dust or dirt and remains inert when exposed to corrosive reagents. This is an ideal release for most rubber and thermoplastics including ABS, polycarbonate, nylon and vinyl. Also used on phenolic and urethane resins.