NSK - Rotus

Item #: NSKRO10163A
Air Motor Chip Air mechanism blows away the cutting dust with clean air coming through the top end of the attachment. The handheld cutting work remains cool by the chip air allowing comfort throughout the working process.

Item #: NSKRO10214
Speed Reducer The speed is reduced to 1/4 but the torque is multiplied by 4 times.

Item #: NSKAA10478
Lubricating Oil Chevron Superla white oil #9 (4 oz.)

Item #: NSK1148
The NSK Rotus air grinding system has become the tool for high-precision, hand deburring and mold polishing. Unique features set this air grinder apart from any other. • Precision-built air motor - provides smooth operation with minimal power loss due to load fluctuations. • Energy efficient design - low air consumption and quiet! • Air cooled and oil lubricated - prolongs life of both air motor and handpieces. • Light and compact design - light weight and good balance combined with lightweight hoses and a unique 360° free rotating joint system provide unhindered flexibility, ideal for prolonged use. • Counter and clockwise rotation - direction and speed can be adjusted by forward/reverse ring on motor. • Versatile design allows interchangeability of handpieces. • Speed range - 3,000 to 30,000 rpm. • Recommended pressure - 45 to 60 psi. • Air consumption - 2.65 cfm at 65 psi Included Equipment: • Air Grinder (IM-301 + IR-310): 1 pc. • Collet Chuck ø1/8" (CHH-3.175), ø2.35 mm (CHH-2.35): 1 pc. each • Air Line Kit (AL-0306): 1 pc. • Foot Control (AFC-45): 1 pc. • Hose for Piping (K-260) 6 ft.: 1 pc. • Oil (K-211): 1 pc.

Item #: NSK2811
Straight Type Attachment Light weight ergonomically designed with minimal vibration for extended use

Item #: NSKKBS61065
Fine Belt Sander Light-weight, compact, minimal vibration and a small diameter grip design keep the hand free from fatigue for long, continuous operation. When polishing a curved surface, the tension between the front and central pulley can be utilized. When polishing a flat surface or a groove, use the flat part of belt.

Item #: NSKRE10210
Extension Joint Connects between a motor and an attachment to extend te total length of the attachment.

Item #: NSKRE10235
Long Attachment for Deep Hole Grinding This unique slim body makes it ideal for cutting and grinding the bottom surface of deep ribs or holes.

Item #: NSKRE10247
90° Mini Angle Type Attachment Ideal for chamfering and deburring the inside of slit pipe.

Item #: NSKRE10266
45° Angle Attachment Ideal for work at 45° angle, especially corners and deep concaves.