Search in Category
Mold Release Agents
Filter Your Search
Type
Brand
Categories
Loading...
Mold Release Agents
Liquids, Compounds & MarkersMold Release Agents
Viewing Page 1 of 6
(53 results)
PAINTABLE MOLD RELEASE AEROSOL
Item #:
SL40012N
Brand: SLIDE PRODUCTS INC
Paintable Mold Release is a light-duty, dry formulation that is UL recognized and requires no special cleaning prior to molding. Molded parts can be painted or decorated post-molding and the release will not interfere with part bonding, heat sealing, laminating or ultrasonic welding. You get perfect finishes every time and more cycles per can over other comparable releases.
ECONO-MIST RELEASE AEROSOL 16FL
Item #:
SL41612N
Brand: SLIDE PRODUCTS INC
EconoMIST Mold Release Spray is an economical, light-duty, solvent-free, silicone-based mold release. It is a UL-recognized and NSF-certified formulation that’s safe for food applications. EconoMIST is Slide’s most popular mold release spray.
KNOCK OUT MOLD RELEASE AEROSOL
Item #:
SL46612N
Brand: SLIDE PRODUCTS INC
Knock Out is the mold release that works where others have failed. It will knock out your production problems and get "sticky parts" cleanly out of the mold. It is approved for indirect food contact and is also paintable. Knock Out Mold Release delivers a light, dry coating that is amazingly effective, working for several cycles without re-application.
ECONO-SPRAY 2 MR AEROSOL
Item #:
SL40710
Brand: SLIDE PRODUCTS INC
Econo-Spray® 2 is a non-silicone paintable mold release that permits post-decorating of molded parts without prior cleaning. Can be used to temperatures up to 650°F/343°C.
HEAVY DUTY 10% MOLD RELEASE AEROSOL
Item #:
SL54912
Brand: SLIDE PRODUCTS INC
Heavy-Duty 10% Mold Release provides Slide's highest percentage of active ingredients for a release agent. This formulation is also widely used in conjunction with Slide’s Super Grease Ejector Pin Grease on ejector pins. It’s an ideal lubricant for the front half of ejector pins (pins in forward position). This product acts as a nearly dry lubricant minimizing the possibility of leaching out onto molded parts. Heavy-Duty 10% Mold Release is a food-approved formulation that is paintable and non-silicone.
ECONO-SPRAY 1 SILICONE 5% MR AEROSOL
Item #:
SL40510
Brand: SLIDE PRODUCTS INC
Econo-Spray® 1 is one of our food approved mold release formulations that contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. It is safe to use on most resins and cleans off easily with a mold cleaner.
ZINC STEARATE MOLD RELEASE AEROSOL 16OZ
Item #:
SL41012N
Brand: SLIDE PRODUCTS INC
A dry, light, water-repellent powder, our Zinc Stearate Mold Release is economical to use and provides a better finish. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs.
URETHANE MOLD RELEASE AEROSOL
Item #:
SL45812H
Brand: SLIDE PRODUCTS INC
Urethane Mold Release is an extremely effective, non-paintable formulation for all polyurethanes: rigid, semi-rigid and flexible urethane foams. Urethane mold release imparts a light, dry coating on the mold, eliminating build-up. Yet, it is so effective that it continues to work for several cycles between applications.
REGULAR SILICONE RELEASE AEROSOL
Item #:
SL40112N
Brand: SLIDE PRODUCTS INC
Get more cycles per spray, more cycles per can, with Slide's Silicone high-quality, pure silicone-oil mold release. Keeps the most challenging parts from sticking while speeding up production. It is recommended for food-packaging molding, and is extremely effective for injection and compression molding.
